Bruit des avions par jour et par heure, entre 2012 et 2018

Quantitative Data from Different Groundwater locations The Data is provided ‘as-is’, without any guarantee of correctness. Punctual measurements of the Water sources flow Girst and Weissbach. The files in the compressed archive are Tab delimited text files, with ‘.’ as comma separator.

The LUGRID grid system has been designed by the National Museum of Natural History of Luxembourg to allow for biological grid based recording of species. It is based on LUREF reference frame and is based on a division along the x and y lines of the Gauss-Luxembourg coordinate system into four 100 km square areas LA, LB, LC, LD . Grids can have 10km, 1km, 0.1 km or 0.001 km sizes. The grids are written as follows: two letter symbols (LA, LB, LC or LD) two groups of equal amount of number symbols. The amount of number symbols in each group indicates the resolution of the grid: 1 number (eg. LC 3 4) -> 10km grid, 2 numbers (eg. LC 34 45) - >1 km grid, 3 (eg. LC 342 458) - > 0.1 km grid, 3 numbers (eg. LC 3429 4581 -> 0.01 km grid

Daily pollen concentration data for 33 pollen types since Jan 1, 1992 in Luxembourg. The view service of this dataset support time requests. The different wms shows value of measurements at a precise timestamp.

This dataset was reported by the Grand Duchy of Luxembourg under the Environmental Noise Directive . This dataset contains overall major railways ≥ 30,000 trains per year that are defined under Directive 2002/49/EC.

This dataset was reported by the Grand Duchy of Luxembourg under the EU E-PRTR regulation. Data reporting by Member States according to Article 7 of Regulation 166/2006/EC covering data reported by operators to the Member States according to Article 5.1 (releases to air, water and land; off-side transfers of waste; and off-side transfers of pollutants in waste water) and 5.2 (information on releases and transfers resulting as totals of all deliberate, accidental, routine and non-routine activities). For all facilities which undertake one or more of the activities specified in Annex I above the applicable capacity thresholds, the reporting covers: (a) releases to air, water and land of any pollutant specified in Annex II for which the applicable threshold value specified in Annex II is exceeded; (b) off-site transfers of hazardous waste exceeding 2 tonnes per year or of non hazardous waste exceeding 2000 tonnes per year, for any operations of recovery or disposal with the exception of the disposal operations of land treatment and deep injection referred to in Article 6, indicating with "R" or "D" respectively whether the waste is destined for recovery or disposal and, for transboundary movements of hazardous waste, the name and address of the recoverer or the disposer of the waste and the actual recovery or disposal site; (c) off-site transfers of any pollutant specified in Annex II in waste water destined for waste-water treatment for which the threshold value specified in Annex II, column 1b is exceeded. The information shall include information on releases and transfers resulting as totals of all deliberate, accidental, routine and non-routine activities. This reporting obligation is an Eionet core data flow Delivery process is managed by EEA

This dataset contains the 2017 Digital Terrain Model of Luxembourg, with a resolution of 1 meter. It has been harmonized according to INSPIRE.

The buildings are derived from data from the topographic database (BD-TOPO-L) of the Cadastre and Topography Administration, based on 2013 aerial imagery. Data of type LOD 1 (Level of detail 1) represents simple blocks without details on roofs. The height of the blocks is defined by the average height of the outer perimeter of the roofs from photogrammetric measurements (i.e. the extraction of horizontal (X, Y) and vertical (Z) information based on aerial images) . The survey of these roof perimeters is part of the 2013 topographic survey for the updating of the topography database (BD-TOPO-L). The origin of these data restricts the resolution of units at building block level, smaller units such as annexes or remarkable building parts (e.g. church towers) are indistinguishable. The data is available as CityGML files, a standard format for exchanging 3D data. Buildings can be downloaded as ZIP files by municipality (+/- 10 MB / MB per file), by canton (+/- 40 MB / MB per file) or for the whole country (+/- 600 MB / MB). The data are projected in LUREF (EPSG: 2169), ie a coordinate reference system using values ​​in meters [m]. Data not transformed into INSPIRE data model

BD-L-TC - wine-growing districts from the official carto-/topographic database. The BD-L-TC is a vector dataset at the scale 1:5000 which represents the earth surface's objects on the national territory, with attributes in german, french and english. Data not transformed into INSPIRE data model

In the scope of the International Civil Aviation Organization (ICAO) requiring countries and airports to provide electronic Terrain and Obstacle Data (eTOD), the Administration de la navigation aérienne has been tasked by the Government to take the steps necessary to comply with this requirement. This Digital Terrain Model (DTM) is the result of a first LIDAR survey flight that has been done in October 2017 and is of a higher resolution than required by ICAO, thus for general purpose, harmonized according to INSPIRE requirements. For this reason this DTM also uses the national reference systems LUREF and NGL. The data itself is split up in 4 different areas, which are specified as follows: Area 1: The entire territory of Luxembourg; Area 2: Terminal Control Area (this area is larger than the territory of Luxembourg); Area 3: Aerodrome movement area; Area 4: Category II or III operations (Runway 24).